- #Broadcasting microphone sound mixer software upgrade
- #Broadcasting microphone sound mixer software Pc
The S0v2 has the option to send and receive audio over USB. The use of VCAs controlled by the ALPS long throw 100mm faders gives a smooth, repeatable response and ensures tight stereo tracking while eliminating mechanical and electronic noise. A PAN/BAL(ance) control is available to facilitate stereo imaging. Gain for each channel is trimmed by the front panel TRIM control providing ☑5dB of gain. The auxiliary channel can switch between 2 independent inputs, one on the rear panel and one on the front panel.Īny channel which has the fader up is routed to the selected output, either PGM or REC or both. The TBU allows direct connection to a telephone line and allows calls to be made and received through the mixer using the handset connection. Input channel 9 is a TBU and stereo auxiliary input channel. The stereo RCA phono line inputs on channels 1 to 8 have 10dB of gain at the input to compensate for unbalanced consumer inputs. Input channel 1 also serves as the microphone input for a dedicated talkback channel. The XLR microphone inputs on channels 1 to 4 have individually selectable +48V phantom power and a gain calibration potentiometer providing up to 65dB of gain for the pre-amp. The mixer has two main stereo buses, PGM (Program) and REC (Record), so each channel also has PGM and REC buttons to independently select which mixer bus the selected input is routed to. Input source buttons at the top of each channel strip are used to select the required mono or stereo source. Providing in total 4 mic, 12 stereo line, 1 TBU & 1 stereo auxiliary inputs which you can switch between. 1 x telephone balance unit (with line and handset ports)/stereo unbalanced RCA phono auxiliary input with a parallel 3.5mm stereo jack input on the front panel.4 x dual stereo unbalanced RCA phono line inputs.4 x mono balanced XLR mic/stereo unbalanced RCA phono line inputs.
The console consists of nine input channels: The uncomplicated and intuitive front panel layout ensures that the unit appeals to novices and broadcast professionals alike, whilst a range of user configurable options allows for flexible operation. The S0v2 can be fitted flush into a desk-top or can be rack mounted directly using the front panel mounting holes. It uses the same high quality circuitry and components as the Sonifex S2 and S1 mixers to provide an audio experience second to none. The Sonifex S0v2 mixer is a compact, low cost, fixed format broadcast mixing console designed for on-air radio use.
#Broadcasting microphone sound mixer software Pc
The S0v2 has a machined luxury face plate in brushedĪluminium finish and a Skype PC interface on 3.5mm jack and USB. The S0v2 allows presenters and DJs to be up and running quickly with a fully featured radio studio mixer. The headphone outputs have a built in limiter to offer hearing protection and the studio speakers mute when a microphone fader is open, with automatic mic live sign switching. The addition of a USB port allows for recording to a PC and for playing a PC automation system directly through the mixer.
#Broadcasting microphone sound mixer software upgrade
An upgrade to the original S0 mixer, it is easy to understand, the S0v2 includes a telephone hybrid for making and recording telephone calls and a 3.5mm stereo jack for plugging in an mp3 player. The S0v2 is a high quality yet simple to operate radio broadcast mixer ideally suited to community radio stations, for educational purposes and for internet radio. InBroadcast, May 2012 > S0v2 Radio Broadcast Mixer
0 kommentar(er)
